Page 1
RMG AUTOMATION +91 9940594413 Automatic Water Level Controller for Tank & Sump Model : AWLC-101 www.rmgautomation.com User Manual http://rmgautomation.com rmgworld@hotmail.com...
Page 2
1. INTRODUCTION Water saving is lifesaving. RMG Automation introduces highly economical model that has basic features in it. This Basic Automatic Water Level Controller automatically turns ON motor when tank is empty ensuring that sump has enough water and turns OFF the motor when tank is full or when sump is empty. It is suitable for Sump to Tank set up.
Page 3
4. INSTALLATION PROCEDURE Caution: Switch off the main power while doing the Power Connection Steps. Step 1: Wall mount the controller unit nearby motor pump switch/starter location. Step 2: Connect AC 230V to Red and Black wires of the controller respectively (refer gure 1 and 2) Step 3: For Switch or MCB, connect Blue pair wires to the switch/MCB of the motor as shown in gure1.
Page 4
6. TROUBLE SHOOTING METHODS Error Solutions Device dead a. Check the power connection wires for loose contacts. / Not b. If problem persists, contact RMG Automation for Powered ON support. Motor not a. Check whether the connections are given properly. switching b.