Advertisement
1. INTRODUCTION
Water saving is lifesaving. RMG Automation introduces highly economical
model that has basic features in it. This Basic Automatic Water Level Controller
automatically turns ON motor when tank is empty ensuring that sump has enough
water and turns OFF the motor when tank is full or when sump is empty. It is
suitable for Sump to Tank set up.
2. DESCRIPTION
Power ON LED: It indicates the power supply to the unit.
Ÿ
Motor ON LED: It indicates the motor ON condition.
Ÿ
SUMP LED INDICATION: It helps to indicate the availability of water level in the
Ÿ
sump.
MANUAL/AUTO MODE SWITCH:
Ÿ
Auto mode: In AUTO mode, motor will automatically switch ON when the
water level in the tank is low and automatically switch OFF when the tank becomes
full.
Manual mode: Helps to switch ON the motor manually. In this mode, the
motor will be constantly running.
Semi-Automatic: Manual ON and Auto OFF. Just keep the controller in
MANUAL mode for the motor to get switched ON and then change it to AUTO
mode for Automatic OFF.
3. TOOLS REQUIRED
2 pair or 4 core communication cable.
Ÿ
Drilling Machine
Ÿ
Simple hammer
Ÿ
Wooden gattas
Ÿ
Screws for mounting units on wall
Ÿ
Line tester
Ÿ
Wire stripper,
Ÿ
1.5Sq.mm Wire for power connections
Ÿ
Insulation tape
Ÿ
1
Advertisement
