Spare Parts Drawings RMG 610 Spare parts drawing RMG 610 with control stage tool N and pilot intermediary part Spare part drawing RMG 610 with pilot and auxiliary pressure stage tool M Spare parts drawing RMG 610 - Sleeve for auxiliary pressure stage with lever joint...
Page 3
DVGW Worksheets G 490, G 491, and G 495. The frequency of periodical maintenance to be foreseen for the safety shut-off valve RMG 711 should be determined according to the prevailing service conditions and the type and composition of the gaseous medium.
2.2 Adjustment of the discharge valve rotation The discharge valve is delivered from the plant with the main adjustment. The necessary rotation of the spindle for this Verstärkungseinstellung Grundeinstellung: Bleed adjustment Linksdrehen bis Anschlag adjustment is given on the picture situated on the pilot (see Adjustage d`amplification X Umdrehungen nach rechts drawing on the right).
Adjustement measure for control stage tool M The measure controls occur for an incorporated control pin (16, 76), that is to say the control rod Beware: (20) is on the piston (23), the sleeve is still closed. The control rod is delivered with an excessive length and must for this reason be shorted by replacing corresponding to the adjustment measure and lastly borderless rounded .
4. Spare Parts Drawings 4.1 Spare Part Drawing RMG 610 (RS 10d) Pilot intermediary part with control stage tool N * Parts marked by an asterisk to be kept in stock maintenance 610.20 p. 7...
4.2 Spare Parts Drawing RMG 610 (RS 10d) Control stage tool N, auxiliary pressure stage tool M Control stage tool M * Parts marked by an asterisk to be kept in stock for maintenance 610.20 p. 8...
4.3 Spare Parts Drawing RMG 610 (RS 10d) Sleeve for auxiliary pressure stage with lever joint Sectional view A - C Lever bearing Spindle for discharge line partial view D sectional view E - E * Parts marked by an asterisk to be kept in stock for maintenance...
4.4 Spare Parts Drawing RMG 610 (RS 10d) Pressure measuring unit for auxiliary pressure stage part no. pressure stage of the main valve description pos. no. PN 16 PN 25 material > PN 25 pressure measuring unit 00 026 891...