Operating Principles - Miele KM 7404 FX Operating And Installation Instructions

Operating principles

Hob when switched off
When the hob is switched off, you can
only see the printed symbols for the
sensor controls and the numerical
display. More sensor controls light up
when the hob is switched on.
Operation
a Sensor controls and indicators
This ceramic glass hob is equipped with
sensor controls which react to finger
contact.
Each time a sensor control is activated,
an audible signal sounds.
For safety reasons, in order to switch
the appliance on, the On/Off  sensor
control needs to be touched for a little
longer than the other sensors.
Selecting a cooking zone
If you want to configure settings for a
cooking zone, the cooking zone must
be selected first.
To select a cooking zone, touch the
relevant cooking zone indicator. The
relevant cooking zone indicator will
begin to flash when touched.
While the cooking zone indicator is
flashing, the cooking zone is selected
and you can configure settings for the
cooking zone.
Exception: if only one of the cooking
zones is in operation, you can configure
settings without selecting the cooking
zone.
Familiarisation
27