Table of Contents
Advertisement
Mounting the Antenna
Mounting the WS-AO-5D23009 Antenna to a Pole
To attach the WS-AO-5D23009 antenna to a pole, you must:
•
Attach the base bracket to the back of the antenna
•
Attach the wall/pole bracket to the back of the antenna
•
Attach the antenna to a pole, or to a wall. You can mount the antenna on pole sizes 1.75 to 3.00
inches or 1 to 1.75 inches in diameter.
To attach the base bracket to the back of the antenna:
1.
Attach the antenna base bracket (item 1) to the back of the antenna using items 2,3, and 4 as
shown in
2.
Verify that the orientation of the hole in item 1 is aligned with the elevation axis.
3.
Tighten using a torque of 5.7 N/m.
Figure 3-38
To attach the wall/pole bracket to the back of the antenna:
1.
Connect the wall/pole bracket (item 10) to the antena bracket (item 1)(mate knurled surfaces)
using items 6, 7, 8, and 9 as shown in
2.
Position the bolt head (item 6) in the socket on the bracket (item 1).
3.
Tighten using a torque of 24 N/m.
3-34 Antenna Installation
Note: Refer to
Table 3-5
on page 3-33 for a complete list of parts that come with the WS-AO-
5D23009 antenna.
Figure
3-38.
Attaching the Bracket to the Antenna
Figure 3-39
on page 3-35.
Advertisement
Table of Contents
