Table of Contents
Advertisement
Mounting Antenna Model WS-AI-DX02360
The WS-AI-DX02360 is a dual-band six port omni-directional MIMO antenna. Three ports are
designed to operate at 2.4 GHz and three ports are designed to operate at 5 GHz. Each of the
MIMO antenna R-SMA ports can be connected to an access point by means of a coax pigtail.
The antenna is designed for ceiling mounting in indoor locations.
Figure 3-67
WS-AI-DX02360 Antenna
Mounting the WS-AI-DX02360
For best results, mount the WS-AI-DX02360 at ceiling level near the center of the coverage area. A
line-of-sight path between the antenna and active floor locations work best. Avoid mounting next
to a column or vertical support that could create a shadow zone and reduce coverage to one
portion of the room.
A threaded post on the back side of the Antenna and a mounting nut (supplied with the antenna),
shown in
Figure
3-68, are the primary mounting configuration when access is available to both
sides of the mounting surface, such as suspended ceiling tile.
Figure 3-68
WS-AI-DX02360 Mounting Post and Mounting Nut
Enterasys Wireless External Antenna Site Preparation and Installation Guide 3-55
Mounting the Antenna
Advertisement
Table of Contents
