Table of Contents
Advertisement
Table 3-12 WS-AI-DX07025 Mount Kit Contents
Item
Quantity
F
G
H
Tools required for attaching mount to antenna and securing to pole:
•
7/16 inch wrench
•
8 mm nut driver or flat head screwdriver for hose clamps
To install the antenna:
1.
Remove the antenna and mount kit from the packaging, and remove the mount kit contents
from its packaging. Confirm that the mount kit includes the contents listed in
above.
2.
Determine the mount configuration. The bracket attachments for vertical polarization, 45
slant, and horizontal polarization mounting configurations are shown in
page 3-57 below.
Figure 3-70
Bracket Attachment for Various Mounting Configurations
3.
Attach antenna mount bracket (item A in
as shown in
Figure 3-71
Nm). Items E, F, and G are described in
Description
6
1/4 inch 20 spring lock washers
6
1/4 inch 20 flat washers
2
Pipe clamps
Note drain hole locations
Table 3-12
below, applying a maximum nut-tightening torque of 55 in-lbf (6.2
Table 3-12
Enterasys Wireless External Antenna Site Preparation and Installation Guide 3-57
Figure 3-70
on page 3-56) to the back of the antenna
on page 3-56.
Mounting the Antenna
Table 3-12
o
on
Advertisement
Table of Contents
