Advertisement
Testing Your Installation
1.
To test your modem and software installation, perform the
in Terminal mode. In
directly to the modem.
2.
To determine if your computer and modem are communicating
command: AT E1 Q V1<Enter>
·
If the COM port and IRQ settings are correct on your
modem responds: OK
·
If the characters you type do not appear, no OK appears, or
the Troubleshooting section
Terminal mode, a cursor appears on your screen, allowing you
in this guide.
software function that puts your computer
to send commands
properly, type the following
modem and in your software, the
double characters appear, see
15
- Quick Links:
- Table of Contents
- Features
- Communications Software
Hide quick links:
Advertisement
