Advertisement
Connecting to the U.S. Robotics BBS
To connect to the U.S. Robotics Bulletin Board System, follow these steps:
1.
Start your communications software. The software settings for
ANSI terminal emulation
Data Bits: 8
Parity: None
Stop Bits: 1
2.
Put your computer in Terminal mode. Enter the following
ATDT 01734692200<Enter>
3.
If this is your first time connecting to our BBS, you will be asked
well as fill out a
4.
When you finish registering, press enter with each prompt until
appropriate letter to
20
questionnaire.
perform the desired function.
the BBS are as follows:
command:
to enter your name and a password, as
you come to the main menu. Select the
- Quick Links:
- Table of Contents
- Features
- Communications Software
Hide quick links:
Advertisement
