US Robotics SportsterVoice User Manual page 14

Installing the Modem
1. Before installing your modem, write your modem's serial number
2. (You can find the serial number on the white sticker under the
outside of the box.)
3. Turn off and unplug your computer and any peripheral devices,
4. Remove the computer's cover. Refer to the computer manual, if
screws to remove before
5. Unscrew and remove the solid bracket at the back of any
6. Insert the modem board into the slot you have chosen with the
firmly in the slot's
7. Once the modem is in place, screw the bracket at the back of
panel. This ensures that
8. Replace the computer cover and all its screws. Reattach all
9. If you currently have a phone plugged into the wall jack,
cable that came with
into the wall jack.
sliding the cover off.
groove.
the modem board is firmly in place.
the modem into the TELCO jack at the rear of the modem. Plug the other end of the cable
here:________________________.
bar code on the modem and on the
such as a printer.
necessary, to see which rear panel
available expansion slot.
gold leads on the modem board's edge
the modem firmly to the computer's rear
cables and power cords.
disconnect it. Plug one end of the phone
11