US Robotics SportsterVoice User Manual page 51

Register Default
S13 0
the total of the values
buffer from 1.5K to 128
number stored in NVRAM at
the number stored in NVRAM
* The 1.5K-byte non-ARQ buffer allows data transfer with Xmodem- and Ymodem-type file transfer protocols
without using flow control.
The 128-byte option lets remote users with slower modems keep data you're sending from scrolling off their
screens. When remote users send your computer an XOFF (Ctrl-S) and you stop transmitting, the data in transit
from your modem's buffer doesn't exceed the size of their screen.
This is also very helpful in situations when a remote modem/printer application is losing characters.
48
Function
Bit-mapped register. Select the bit(s) you
in the Value column. For example,
ATS13 = 17 enables bit 0 (value is 1) and
bit 4 (value is 16).
Bit Value Result
0 1 Reset when DTR drops.
1 2 Reset non-MNP transmit
2 4 Set backspace key to delete.
3 8 On DTR signal, auto dial the
4 16 At power on/reset, Auto Dial
5 32 Reserved.
6 64 Reserved.
7 128 Disconnect on escape code.
bytes.*
position 0.
at position 0.
want on and set S13 to