US Robotics SportsterVoice User Manual page 50

Register Default Function
S10 7 Sets the duration, in tenths of a second, that
loss of carrier before
distinguish between a line hit, or
connection, from a true disconnect (hang up)
While we don't recommend connecting the
waiting, if you have
modem from misinterpreting
remote modem. A better alternative is to ask
disable call waiting (usually *70). For
Note: If you set S10 = 255, the modem will
is lost. Dropping
S11 70 Sets the duration and spacing, in
dialing.
S12 50 Sets the duration, in fiftieths of a second, of
escape code
hanging up. This guard time allows the
it, you may wish to adjust this setting upward
the second call signal as a disconnect by the
DTR hangs up the modem.
sequence.
other disturbances that momentarily break the
by the remote modem.
your phone company how to temporarily
example: ATDT *70 phone number.
the modem waits after
modem to
modem to a line with call
to prevent the
not hang up when carrier
milliseconds, for tone
the guard time for the
47