US Robotics SportsterVoice User Manual page 15

Configuring with Windows 95
After removing all the connectors from the modem's jumpers and installing the modem, turn your computer on.
Then follow these steps:
1. In the New Hardware Found dialog box, select the Select from a
on the OK button.
2. In the Select Hardware Type dialog box, find and click on the
button.
3. In the Install New Modem dialog box, find and click on the U.S.
list.
4. Next, find and click on your modem model listed in the Models
Windows 95 has now been configured to work with your new modem. Now you're ready to install your software.
Installing your Software
1. Insert the software diskette included with your modem or
software, consult
2. From Program Manager, choose File. Then choose Run and
3. Once the software is installed, enter the software group and click
You have successfully finished installing your modem and software.
12
its own manual for installation procedures.
list of alternate drivers option. Then click
Modem selection. Then click on the OK
Robotics selection in the Manufacturers
list. Then click on the OK button.
another modem software disk. If using other
type a:\install and press <Enter>.
on the application icon.