US Robotics SportsterVoice User Manual page 20

If both modems exchange carrier signals but fail to establish a communications link,
· Place the call again. The telephone company routes all calls,
call.
· Call a different modem to see if the problem persists.
first tried to call.
If your modem doesn't connect at 2400 bps with a 2400 bps modem,
· The remote modem might be an older 2400 bps modem that
error control with the
· Try connecting with the remote modem again.
· When the call is finished, remember to reset the modem:
During data transfer...
If your screen displays random or garbage characters,
· Set your software to the same word length, parity, and Stop bits
· Make sure that your software and modem are set to the same
variable serial port
· Type the following command to load the template that enables
optimal settings.
· Disable any Terminate and Stay Resident (TSR) programs
following command: AT&M0<Enter>
rate.
AT&F1<Enter>
even local calls, differently each time you
The problem may be with the modem you
does not support error control. Disable
ATZ<Enter>
as the remote modem.
flow control setting and to either a fixed or
hardware flow control as well as other
running in the background.
17