Table of Contents
Advertisement
Available languages
Available languages
Congratulations!
The installation of your USRobotics 10/100/1000 Mbps 8-Port Switch is
complete. As connections are established with the 10/100/1000 Mbps 8-Port Switch, the
corresponding LED lights will turn on. Repeat this step as needed for up to seven additional
devices.
This is one of many possible configurations.
Note: For networking information, refer to the documentation for your operating system.
Register your product online at
http://www.usr.com/productreg
Wall Mounting the 10/100/1000 Mbps 8-Port Switch
The switch has openings for easy wall mounting. You can mount the switch to the wall with two
metal brackets and two anchored screws, as shown in the following illustration:
Wall Mounting Screw Diagram
120mm
3
Advertisement
Table of Contents
