Parts And Accessories - Siemens SIMATIC NET RUGGEDCOM MX5000RE Equipment Manual

Introduction
1.8 Parts and accessories
Mounting brackets
3 POS power terminal block plug
3 POS power terminal block plug
M4 (#8) ring tongue
Braided or equivalent ground wire
CAT-5 Ethernet cables
1.8

Parts and accessories

Parts and accessories, including removable media, kits, cables, and other
components, are available through the
selector.automation.siemens.com].
Modules
Available modules are listed in the
support.industry.siemens.com/cs/ww/en/ps/21322/man].
12
Tools
RUGGEDCOM Modules Reference Manual [https://
Quantity
For the required wire gauge, refer
to the power supply specifications
in the "RUGGEDCOM MX5000RE
Modules Reference Manual"l [https://
support.industry.siemens.com/cs/ww/
en/ps/21322/man].
4 For mounting the device to a standard
48 cm (19 in) rack.
Two brackets are pre-installed on the
device. An additional two brackets
(including hardware) are also included
for high-vibration or seismically active
locations.
1 For the failsafe alarm relay. The device
includes one screw-type terminal block
plug.
Additional plugs are also available for
purchase. For more information, refer
to "Parts and accessories" (Page 12).
1 For HI AC or DC power connections. The
device includes one screw-type terminal
block plug.
Additional plugs are also available for
purchase. For more information, refer
to "Parts and accessories" (Page 12).
4 For connecting wires to a screw-type
terminal block plug or the chassis
ground connection.
Except for the chassis ground
connection, the ring tongue must have
short insulated ring terminals with a
minimum distance of 5 mm (0.2 in)
from the ring center to the insulation.
1 For grounding the device to safety
Earth.
— For connecting the device to the
network.
RUGGEDCOM Selector [https://ruggedcom-
Equipment Manual, 11/2023, C79000-G8976-1060-17
Detail
RUGGEDCOM MX5000RE