Specifications; Plug Configuration; Electrical Rating Charts - Hatco CSU Series Installation And Operating Manual

SPECIFICATIONS

Plug Configuration

Units are supplied from the factory with an electrical cord and
plug installed. Plugs are supplied according to the applications.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install proper voltage and size electrical receptacle.
NOTE: Receptacle not supplied by Hatco.
Electrical Rating Chart — CSBF Models
Compressor
Size
Model
CSBF-24-F 1/3 hp
CSBF-24-I 1/3 hp
CSBF-24-S 1/3 hp
CSBF-36-F 1/3 hp
CSBF-36-I 1/3 hp
CSBF-36-S 1/3 hp
CSBF-48-F 1/3 hp
CSBF-48-I 1/3 hp
CSBF-48-S 1/2 hp
NOTE: Shipping weights are estimated.
Volts Watts Amps
220 686
220–230 686–749 3.1–3.3
230–240 749–816 3.3–3.4
240 816
220 2339
220–230 2339–2557 10.6–11.1
230–240 2557–2784 11.1–11.6
240 2784
NOTE: The specification labels are located on the bottom of
the unit and the back of the control panel. See the label
for the serial number and verification of unit electrical
information.
Design Pressure
High Side Low Side Configuration
25.7 bar 12 bar
(373 psig) (174 psig)
25.7 bar 12 bar
(373 psig) (174 psig)
25.7 bar 12 bar
(373 psig) (174 psig)
3.1 25.7 bar 12 bar
(373 psig) (174 psig)
29.16 bar 12 bar
3.4 (423 psig) (174 psig)
29.16 bar 12 bar
(423 psig) (174 psig)
29.16 bar 12 bar
(423 psig) (174 psig)
29.16 bar 12 bar
(423 psig) (174 psig)
10.6
22.8 bar 12 bar
(331 psig) (174 psig)
11.6
6
English
BS-1363
Plug Configuration
Plug Shipping
BS-1363 44 kg (96 lbs.)
BS-1363 49 kg (109 lbs.)
BS-1363 56 kg (124 lbs.)
BS-1363 55 kg (121 lbs.)
BS-1363 62 kg (137 lbs.)
BS-1363 74 kg (163 lbs.)
BS-1363 65 kg (144 lbs.)
BS-1363 78 kg (173 lbs.)
BS-1363 80 kg (176 lbs.)
Form No. CS_AAM-0417
Weight