Test Operation Messages - Honeywell NOTIFIER INSPIRE E10 Commissioning Instructions

Messages and their Meanings
Message

TEST OPERATION MESSAGES

FARE REMOVED FROM TEST
FARE TEST
INDICATOR TEST STARTED
INDICATOR TEST STOPPED
ZONE IN TEST
ZONE REMOVED FROM TEST
40
Meaning and possible remedial action.
If a fault persists then seek advice. Any remedial action requiring wiring
or replacement of parts, this work must be done by a trained engineer.
A message to inform that Fire Alarm Routing
Equipment has been removed from Test mode.
A message to inform that the Fire Alarm Routing
Equipment is in Test mode.
A message to informs that an 'indicator and display'
test has started.
Action: To stop the 'indicator and display' test select
'STOP INDICATOR TEST' button.
A message to informs that 'indicator and display' test
has stopped.
A message to inform of a Zone in Test mode.
Action: Once the tests are complete take the Zone out
of Test mode.
A message to inform a Zone has been removed from
Test mode.