Honeywell NOTIFIER INSPIRE E10 Commissioning Instructions page 15

Module firmware upgrade
USB METHOD OF MODULE SOFTWARE UPGRADE
You will need a blank memory stick, access to module software image and panel access level 2 PIN.
01 Format USB Stick with volume label HONEYWELL
02 Copy upgrade image files to USB-stick
03 Ensure that door on the INSPIRE panel is closed
04 Login to Access Level 2
05 Open door of panel and verify that Access Level has changed to Level 4
06 Insert the USB-Stick into the USB socket in the CPU module (illustration required)
07 Follow the instructions that is Displayed on the panel
08 The panel will automatically reboot
09 After the panel has re-booted check the intended firmware versions of each Module.
10 Remove USB-Stick from CPU module (illustration)
Notifier INSPIRE E10/E15 Control Panels - Commissioning
15