Step2: Chargingthe battery pack
You can charge
the batter}'
after a(taching
Ihe "InfoLITHIUM"
ballery
pack
(P series)
(p. 107) to your camcorder.
DC IN jack cover
DC IN jack--
CHG law
Power switch
Batter'
Power cord
To the wall outlet
DC plug
AC Adaptor
4
|
Slide the battery pack in the
direction of the arrow until it
clicks.
3
Connect the AC Adaptor to the
DC IN jack on your camcorder.
Open the DC IN jack cover to connect
the AC Adaptor.
DC IN jack cover
Match the • mark
on the DC plug with
• nlark on yollr
camcorder.
4
Connect the AC Adaptor to the
wall outlet using the power cord.
The CHG (charge) lamp lighl_ up and
charging slarls.
CHG
$-
E
-* Slide the POWER switch in the
direction of the arrow to set it to
OFF (CHG) (The default setting).
The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor
from the DC IN jack on your
camcorder.
Disconnect
the AC Adaptor
holding
both your camcorder
and the DC plug.
17