Sony Handycam DCR-DVD92 Operating Manual page 100

[Cannot start Easy Handycam with USB connected] or [Cannot cancel Easy
Handycam with USB connected] appears on the screen of your camcorder.
• You cannot start or cm_cel tile Easy Handycmn operation x_hile tile USB cable is connected.
Disconnect the USB cable from your camcorder first.
You cannot transfer image data from your camcorder to a computer.
• Set IUSB speed] to IFULL SPEED] in setup item.
The images or sound of your camcorder cannot be played back correctly.
• When you connect your camcorder to a computer not compatible _ith Hi-Speed USB (USB
2.0), it mW not be able to be played back correctly. However, it does not efti:ct to the images
or sounds transferred to your computer.
• When you set the [USB SPEED] to ]FULL SPEED], it may not be able to be played back
correctly. Howe; er, it does not effect to the images or sounds transti:rred to your computer.
• Depending on the computer you use, the plwed back image or sound may stops temporarily,
but this does not etti:ct tile images or sound transferred to your computer.
You cannot write data from your computer on a disc in your camcorder using
the USB cable.
• Tile disc is not compatible _ith your camcorder. Use a disc compatible _itfi your camcorder
(p. 13).
• You cannot write data from other than the Picture Package on a disc ill your camcorder.
Picture Package does not function correctly.
• Close Picture Package, then restart tile computer.
An error message appears while operating Picture Package.
• Close Picture Package first, then slide the POWER s_qtch on your camcorder to turn on
another lamp.
The "First Step Guide" is not displayed correctly.
• Reli:r to tile PDF tile of "First Step Guide" (FfistStepGuide.pdf). For details on copying pdf
file, see page 86.
100