Playingthe Pictureon A Tv - Sony Handycam DCR-DVD92 Operating Manual

Playingthe pictureon a TV
Connect your camcorder to the wall outlet using the supplied AC adaptor for this operation
(p.17). Refer also to the iustruction manuals supplied with the devices to be connected.
A/V jack
@
, _:::, : Signal flow
[] AN connecting c able(supplied)
Connect to the input jack of tile olher device.
[] AN connecting c ablewithS VIDEO
(optional)
When connecting to another device _ia tile
S VIDEO jack, b 5 using ;m A/V connecting
cable wifll an S VIDEO cable (optional),
higher quality pictures can be produced than
wilh an A/V cable connection. Connecl the
while and red plug (lefl/right audio) and the
S VIDEO plug (S VIDEO chamlel/of lhe
A/V connecting cable wifll an S VIDEO cable
(optional). The yellow plug connection is niu
necessary.
When yourTV is connectedto a VCR
Connect your camcorder to the LINE
IN input on the VCR. Set the input
selector on the VCR to LINE.
VCRs or TVs
To set the aspect ratio according to
the connected TV
(16:9/4:3)
(DCR-DVD203/DVD403/DVD703/
DVD803)
Change the setting according to the screen
size of the TV you will view pictures on.
@ Slide the POWER switch down to light up
the [] (Play/Edit) lamp.
@ Touch [g_gg0]_ [SETUPI
STANDARD SET _ [TV TYPEI
[16:91 or [4:31 _ [Ug].
• When you connect your camcorder to a TV
compatible with tile [D- I/ID-2 syslcm, or via an
S VIDEO jack, and play back the disc, _t [TV
TYPE] to [16:91. The TV switched to lhll mode
automatically. Relcr also to the manual supplied
with your TV
• When you set [TV TYPE] to [4:31, the inlage
quality may deteriorate. Also, when the
recorded picture's aspect ratio switches bet,,veen
16:9 and 4:3, the image may jiuer.
42