Step3: Turningthe Poweron, And Holdingyour Camcorder - Sony Handycam DCR-DVD92 Operating Manual

Step3: Turningthe poweron, and holdingyour
camcorder
To record or play back, slide the POWER
switch to turn on the respective lamp.
When using it lor the first time, the
[CLOCK SET] screen appears (p.23).
• When you set the POWER switch m
(Movie) or It_/Sfill), the lens cover opens
up (Excepl lor DCR-DVD92/DVD602).
• At}er you have sel tile date and time
([CLOCK SETI, p23), file next time you
turn on the power of your canlcorder, the
curtain (late and time will be displayed on
the LCD screen tbr a ti:w seconds.
Remove the lens cap by pressing
both knobs on the sides of the
cap (DCR-DVD92/DVD602).
*Except Ior DCR-DVD92/DVD602
3
Hold your camcorder correctly.
4
! Turn on the power by sliding the
POWER switch in the direction
of the arrow while pressing the
green button in the center.
When you record or play back. switch
the power mode by sliding the POWER
switch in the direction of the arrow until
the respective lamp lights up.
Green button
ON
A
"IF Ensure a good grip, then fasten
the belt.
2O
(Movie): To record movies
(Still): To rccord still inlages
[] (Play/Edit): To play back pictures on
your camcorder, or m edit them (DVD-RW:
VR mode only)
@
CHG
To torn off the power
Slide the POWER switch up to OFF
(CHG).
• AI tile time of purchase, the power will be
sel 1o turn oil aulomatically if you leave your
canlcorder wilhoul any operation attempted tbr
approximately 5 minutes, 1o save ballery power.
([A.SHUT OFFI, p.b9).