Sony Handycam DCR-DVD92 Operating Manual page 68

B
ST£@£BD SET(8_lr_ti,r_8@
DATE/TIME
Date
Time
• ,_appears Ibr an image recorded using a flash.
* The data code is displayed on lhe TV screen if
you
connect your canlcorder to a TV.
* The indicalor toggles through lhe Jollowing
sequences as you press DATA CODE on
lhe remote commander: DATE/TIME
CAMERA DATA -+ OFF (no indication)
(Excepl Ibr DCR-DVD92/DVD602).
. Depending on lhe disc condilion, Bars [--:--:--I
appear.
* The setling returns to [OFF] when you have
tile power source disconnected from yollr
camcorder l_)r lllOrClhan 5 lninules.
_AUTO
Displays the remaining disc indicator for
about 8 seconds in situations such as those
described below.
• When you check the disc remaining by
sliding the POWER swilch down lo
(Movie) or _ (Still).
• When you set the POWER to _ll (Movie)
or _ (Still). then press tile DISP/BATT
INFO to switch the indicator o1_ to on.
• When the remaining capacity of the disc is
less than 5 minutes Ibr _ (Movie) or 30
images Ibr _ (Still).
• When you start recording Ii'om tile line
inpul.
ON
Always displays the remaining disc
indicator.
The default setting is [ON] so that you can
use the Remote Commander (p. 41).
• Sel to [OFF] to prcvenl your camcorder
hom responding to a command senl by olher
equiplnent renlole colltrol.
• The setting returns to [ON] when you have
the power source disconnected l}olll yollr
canlcorder Ik)l lllOrC than 5 lninllleS.
The camera recording lamp will not light
up during recording when you set this to
[OFF]. (The dehmlt setting is ION].)
I_ON
A melody sounds x_hen you start/stop
recording, or operate the touch panel
OFF
Cancels the melody.
I=" LCD PANEL
Sho_ s displays such as the counter on the
LCD screen and in the vie_ finder.
V-OUT/PANEL
Shox_s the display also on the TV screen.
I_. N ORMAL
Scrolls the setup items dm_ nx_ards hy
touching []_].
OPPOSITE
Scrolls the setup items upx_ ards by
touching [_.
68