Recordingadditional scenesafter finalizing
You can record additional material on the
finalized DVD-RWs (VIDEO mode)/
DVD+RWs by l_llowing the steps below if
there is space to record oil the disc.
When using the finalized DVD-RW (VR
mode) disc, you can record additional
material on the disc without an> additional
steps.
• Use an ACAdaplor as power source to prevent
your camcorder
]rOll]
rullnillg
OUt of
power
during
operation.
• Do not apply
shock
or vibration
to your
camcorder,
and
do not disconnect
the AC
adaptor
during
operation.
• A DVD menu and a Photomovie created during
finalizing are deleted.
• When you use a double-sided disc. h)llowing
procedurcs are required on each side.
4
/
Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord to
the wall outlet.
2
Turn on the power by sliding the
POWER switch down.
3
Insert the finalized
disc into your
camcorder.
4
Touch _
--* [SETUP].
5 Touch @ DISC SET --*
[UNFINALIZE].
6
Touch [YES] -+ [YES], then touch
I_
when [Completed.] appears.
If you have created a Pholomovie or a
DVD menu in finalizing (p.44), the
felh)wing sleps are required.
Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord to
the wall outlet.
2
Slide the POWER switch down to
light up the _
(Movie) or I_1 (Still)
lamp.
3
Insert the finalized disc into your
camcorder.
A confirmation dialog asking if you
recoM additional scenes appears.
4
Touch [YES] -+ [YES].
[Completed.] appears, then the
screen returns Io the recording screen.
5O