Sony Handycam DCR-DVD92 Operating Manual page 89

A problem occurs when the camcorder is connected to the AC Adaptor.
• Turn off the power, and disconnect tile AC Adaptor from tile v_:dloutlet. Then, connect it
again.
An unknown picture appears on the screen.
• Tile camcorder is in [DEMO MODE] (p.64). Toucfi the LCD screen or insert a disc to cancel
[DEMO MODEl.
An unknown indicator appears on the screen.
• They may be _arning indicators or messages (p.101).
The picture remains on the LCD screen.
• This occurs if you disconnect the A(' Adaptor from the _all outlet or remove the battery
pack without turning off tlae po_er first. This is not a malfimction.
You cannot turn the LCD backlight off.
• During Easy Handycam operation, you cannot turn the LCD backligfit on/off using the
DISP/BATT INFO. Cancel Easy Handycam operation (p.27).
The buttons do not appear on the touch panel.
• Toucfi the LCD screen lightly.
• Press DISP/BATT INFO on your camcorder (or DISPLAY on the Remote Commander:
Except 12_r D CR-DVD92/DVD602) (p.22, 41).
The buttons on the touch panel do not work correctly or do not work at all.
• A(ljust the screen ([CALIBRATION]) (p. 110).
• If you change the aspect ratio of the picture, the aspect ratio of the buttons of the touch panel
and indicators will sx_itch to the selected one (p.26, 60).
The picture in the viewfinder is not clear.
• Extend Hieviewfinder (p.21).
=-
• Use the viewfinder lens a_.ljustmentlever to a_.ljust I he lens (p.21 ). m
The picture in the viewfinder has disappeared.
• The picture is not disph,yed in Ihe viex_finder _hen the LCD screen is open. Close the LCD
screen (p.21).
8g