Related Manuals for ClearOne BMA 360D
Summary of Contents for ClearOne BMA 360D
- Page 1 Reference Manual BMA 360D Commands Supported Products: BMA 360D DOC-0579-001v1.0 September 2023...
- Page 2 ClearOne Part Number: DOC-0579-001v1.0 September 2023 © 2023 ClearOne Inc. - All rights reserved. Information in this document is subject to change without notice. Other product names may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or...
-
Page 3: Table Of Contents
Contents 1. Concepts ..........................4 1.1 Introduction ........................4 1.2 Connection Properties ....................4 2. BEAMREPORT .......................5 3. BREPORT .........................5 4. BFZONE ..........................5 5. DANTEIP ...........................5 6. DANTEMAC ........................5 7. GAIN ............................6 8. HELP ...........................6 9. IPADDR ..........................6 10. LBO ...........................6 11. LEDBLINK ........................6 12. -
Page 4: Concepts
BMA 360D. 1.2 Connection Properties Establish a TCP connection using the IP address of the BMA 360D and port #3603. For testing purposes, a terminal emulator, such as Tera Term, can be used to test the commands. To see typed characters, Local Echo must be enabled in your terminal emulation software. -
Page 5: Beamreport
BMA 360D Commands Reference Manual 2. BEAMREPORT Generates a single all beam report of current activity status. Query format: BEAMREPORT Response format: BEAMREPORT [b12][b11][b10][b9][b8][b7][b6][b5][b4][b3][b2][b1] [bx] = 1 Active beam, 0 = Inactive beam 3. BREPORT Initiate or halt continuous reporting of active beams. -
Page 6: Gain
BMA 360D Commands Reference Manual 7. GAIN Adjust or query gain settings of the SmartMix output, Speaker outputs, or AEC reference input. Command format: GAIN [channel] [group id] [value] [channel] = 1 to 4 [group id] V = SmartMix, S = Speaker,... -
Page 7: 12. Ledbright
Query format: LEDBRIGHT [state] Response format: LEDCOLOR [state] [color] 14. LOCATE Initiate or query the BMA 360D locate LED mode. Command format: LOCATE [name] [enable] [name] = The programmed BMA name [enable] 1 = enable locate mode, 2 = disable locate mode... -
Page 8: 16. Mute
BMA 360D Commands Reference Manual 16. MUTE Adjust or query mute settings of the BMA 360D microphone, individual beam silencing status, individual speaker channels or AEC reference input. Command format: MUTE [channel] [group id] [value] [channel] = 1 to 12...