Information in this document is subject to change without notice. Document: QSG-0170-001v1.0 September 2023 Important Safety Information 1. Before you set up the BMA 360D, read this manual carefully. Follow the setup instructions indicated in this manual. 2. Keep this manual for future use.
Verify that you have received all parts associated with each of the components. Inspect your shipment carefully. If the shipment shows obvious signs of damage, retain original boxes and packing material for inspection by the carrier, and contact them immediately. ClearOne is not responsible for product damage incurred during shipment.
Page 4
Install and wire speakers. Using speakers requires the use of a 90 Watt PoE++ injector. Connect a Cat 6 cable (not provided) between the BMA 360D and the PoE Injector. Connect a Cat 6 cable (not provided) between the PoE injector and the network switch Configure the BMA 360D network and audio properties using Console AI Lite**.