Tandon TM-100-1 Operating And Service Manual page 80

5.9.13 Harness the index e]Tiitter sensor cables and the index detector sensor cables to the bundle (see
Figure 5-17) located at the rear of the disk drive.
5.9.14 Insert a diskette into the disk drive.
5.9.15 Check to ensure that the aforementioned sensor cables do not touch the diskette, the Cone Lever
Assembly, and the Carriage Assembly.
5.9.16
5.9.17
Reinstall the Logic PCBA (see Section 5.2).
Adjust the index-to-data timing (see Section 2.3.2.1 ).
5-21