Advertisement
-6
INSERTING THE PAPER
a.
A utomatic Paper
Insertion
1
Open the Paper Support and position the Paper
Guide for the size of the paper you are using.
3
Return the Paper Release Lever and Paper Bail
Lever to their original positions and then position
the Paper Bail Rollers to hold down the paper.
Insert the paper straight under the back of the
Platen.
Pull back the Paper Bail Lever to move the Paper
Bail away from the Platen. By pulling it back
further, the paper will be automatically inserted.
Paper Bail
Lever
•
If necessary, pull the Paper Release Lever and
adjust the paper to the desired position.
Paper Release
Lever
Paper Bail
Rollers
Paper Bail
Proper printing and correction will not be possible
if there is any slack in the paper.
Hold the paper by the top edges and pull up to
remove any slack.
b.
Paper-End Detection
When the end of the paper is reached, a buzzer will
sound and the " P A P E R END!!" message will appear
on the LCD Display to indicate that the paper has run
out. Typing can be continued, but at every new line
the buzzer will sound and the " P A P E R
END!!"
message will be displayed. Insert a new sheet of paper
and continue typing.
PAPER
END
11
•
Paper which has large areas of black print on it may
sometimes cause " P A P E R END!!" to appear on the
LCD Display.
When you are printing the Text Memory contents or
using the unit as a printer and the end of paper is
detected, printing stops.
At this time, an additional line can be printed each
time the PRINT ON/OFF Key is pressed.
After changing the paper, normal printing can be
resumed by pressing the PRINT ON/OFF Key.
f^l
Paper Guide
Paper Support
Advertisement
Chapters
