Advertisement
Chapter
1
k.
Centering
Centering is performed as indicated below, depending
on the carriage position.
•When the Carriage is at the left margin, centering is
performed between the left and right margins.
•When the Carriage is at a paragraph indent position,
centering is performed between that position and
the right margin.
•When the Carriage is on a tab, centering is
performed between that tab and the next tab.
•When the Carriage is on the last tab, centering is
performed between that tab and the right margin.
•Operation
CODE
c
CENTER
1
Press the C Key while
pressing the CODE Key.
The Carriage moves to
the centering position and
the following appears on
the LCD Display.
•When centering is between
the margins:
MARGIN CENTERIHQ
•When centering is between
tabs:
TAB CENTERING
2
Enter the words or sen-
tences to be centered.
When the RETURN Key
is pressed, the typed char-
acters are printed. The
Carriage returns to the
left margin on the next
line.
c
E N T E
R
E D
c
H
A R A C
T E
R S
•When a line feed is not desired, press the TAB Key
to move the Carriage to the next tab or to the right
margin.
• When you try to enter a large number of characters and
any further entry will go beyond the tabs or margins, or
will be superimposed over already printed characters,
the buzzer will sound and character input is no longer
accepted.
•To cancel the Centering Mode, press the (x] Key and
then press the REPEAT Key to delete all the entered
characters until the buzzer sounds. Then press the ( x j
Key again.
r»i
Advertisement
Chapters
