Advertisement
OTHER
In order to prevent inadvertent misoperation or
damage to the machine itself, this machine emits
different buzzer tones to inform the operator of an
alarm condition or a misoperation, and simultaneous-
ly stops.
At this time, the keyboard will be completely locked,
preventing key inputs from being made.
Conditions which are particularly liable to occur are
shown below. In such a case, first set the POWER
Switch to " O F F " , remove the cause of the trouble,
then turn the POWER Switch " O N " again.
Buzzer sound
Cause
Remedy/check
Reference
page
Carriage stop error
(Beep:—)
A foreign object which has fallen into
the mechanism obstructs the
movement of the Carriage.
Remove foreign matter from
mechanism.
Cupwheel stop error
( B e e p : — - )
A foreign object which has fallen into
the mechanism stops the rotation of
the Cupwheel.
Remove foreign matter preventing the
Cupwheel from rotating.
10, 11
Cupwheel stop error
( B e e p : — - )
The Ribbon Cassette is tangled on the
Cupwheel and stops its rotation.
If the ribbon is tangled on the
Cupwheel, remove the ribbon
cassette, then re-install it.
1 0 - 1 3
Ribbon stop error
( B e e p : - - )
The Ribbon Cassette or Correction
Tape has been used up.
Replace the Ribbon Cassette or
Correction Tape.
1 2 - 1 4
Platen stop error
(Beep:
- )
Paper is jammed.
Remove the jammed paper.
15
Cupwheel initialize
error
(Beep:
)
The Cupwheel is not attached
properly.
Remove the Cupwheel, then re-install
it.
10, 11
Cupwheel initialize
error
(Beep:
)
The Cupwheel is not installed.
Install the Cupwheel.
10, 11
b.
Product Service
C.
Caution
Should your Panasonic product ever require service,
refer to enclosed Directory for an Authorized Ser-
vicenter or consult your authorized Panasonic dealer
for detailed instructions.
7 4
This equipment has been tested and found to comply
with the limits for class B computing devices in
accordance with the specifications set forth in Subpart
J of Part 15 of the FCC rules. If this equipment causes
interference to radio or television reception, which
can be determined by turning the equipment on and
off, use the equipment in another location and/or
utilize an electrical outlet different from that used by
the receiver.
•
Recommended shielded cable must be used in order
to meet FCC emission limits and also to prevent
interference to nearby radio and television recep-
tion.
Advertisement
Chapters
