Advertisement
SPELL VERIFY
C. How to verify the spelling
of an entire text file
1
While the Spell Verify Function is activated,
press the TEXT ON/OFF Key, input the file
number to be verified, and press the RETURN
Key.
2
Move the cursor to the position where you wish
to start the check.
3
Press the F Key while pressing the CODE Key.
4
Each word in the text will be verified from the
cursor position sequentially to the end of the
text.
UERIFVIHG
5
If a word that is not in the dictionary is found,
spell verification will be interrupted, the buzzer
will sound, and the word will appear as a flashing
indication on the LCD Display.
6
Correct the misspelled word.
7
To continue spell verification, press the F Key
while pressing the CODE Key again.
8
If no misspelled words are found in any part of
the text, the following message will appear on the
LCD Display, and the cursor position remains
unchanged.
UERIFIED
d.
How to ADD words to the
user's dictionary
1
Input the word to be registered, from the
keyboard.
2
Press the ADD Key.
3
The word will be registered in the user's memory,
and the following message will appear on the
LCD Display.
(Example: If you added the word "Accu-Spell")
ADDED: Accu-Spell
• You can register a word by pressing the ADD Key
immediately after the check.
• You can also register a word by first moving the
carriage or cursor to the desired words, then
pressing the ADD Key.
•You can also register words which include numbers
and symbols.
But at least two alphabet characters should be
included for registration. Otherwise, the following
message will appear on the LCD Display.
NOT ACCEPTED
• If there is no room in the user's dictionary memory
to register the word, the buzzer will sound and the
following message will appear on the LCD Display.
In this case, you must first delete a word or words
already registered in order to register the new
words.
USER DICTIONARY FULL
_
• If the word which you wish to register is already
registered in the main dictionary or user's diction-
ary, the following message will appear on the LCD
Display.
_ _
ALREADY EXISTS
•The maximum length of a word which can be added
is 30 characters.
If you attempt to add a word which has 31 or more
characters, the following message will appear on the
LCD Display.
WORD TOO LONG
Advertisement
Chapters
