Table of Contents
Advertisement
1-5
CHANGING THE DAISYWHEEL
To remove
the daisywheel,
you do not have to
remove the ribbon cassette.
You will see a green lever on the right side of the
carriage. Pull this lever toward you and lift out the
plastic cartridge of the daisywheel.
To insert the daisywheel, place the plastic cartridge in
the carriage with the characters facing toward the
platen. Push the green lever back into position.
1-6
INSERTING THE PAPER
1
Open the Paper Support and position the Paper
Guide for the size of the paper you are using.
(The Paper Guide is on the Paper Support and
permits lateral sliding.)
Paper
Support
2
Insert the paper straight under the back of the
Platen.
3
Pull the Paper Bail Lever towards you. While
keeping the left edge of the paper in line with the
Paper Guide, turn the Platen Knob until the
paper appears at the front of the Platen.
Paper Bail
4
Feed the paper underneath the Paper Bail, pull
the Paper Release Lever, and adjust the paper.
5
Return the Paper Release and the Paper Bail
Levers
to their original positions
and
then
position the Paper Bail Rollers to hold down the
paper.
Paper Bail Rollers
Proper printing and correction
will not be
possible if there is any slack in the paper.
Hold the paper by the top edges and pull up to
remove any Slack.
SIMAYO
(OR
Esl
a]
=
ts
~
aS
ss
:
Ps
5
ee
3
15
Advertisement
Table of Contents
