Advertisement
2-2
CORRECTION
Chapter 2
a .
Automatic Correction
TPWR Mode
This unit has a two line correction memory so you can
delete the characters on the current line and the
previous line.
For details of correction using the LCD Display in the
L/L Mode or some other mode, refer to page 24.
BACK
SPACE
k
Space Bar
Use the BACK SPACE
Key, the Space Bar, or
the
CODE
Key
and
RELOC-EXPRESS
Key
to move the Carriage to
the position of the charac-
ter to be corrected.
• T o
correct a
mistake
made in the previous
line, press the REV IN-
DEX Key while pressing
the CODE Key to return
the Carriage to the end
of
the
previous
line,
then press the BACK
SPACE Key to move the
Carriage to the position
of the character to be
corrected.
• After printing a character at the end of the line, the
Carriage will move back and the character will be
deleted automatically when the (x) Key is pressed.
•When several characters have been printed super-
imposed, only the character printed last will be
deleted automatically.
Correction Tape
Two types of tape can be used for correction.
REPEAT
Press the < 3 Key.
The character will be de-
leted.
J
At this time, to continue
automatic
correction
press the REPEAT Key.
This will cause the pre-
viously printed characters
on the line to be deleted
one at a time until the
REPEAT Key is released.
4
Type the correct charac-
ter.
5
When the RELOC Key is
pressed, the Carriage re-
turns to the last position
and typing can be con-
tinued.
• Lift-off Correction Tape
This type of correction tape is used together with
correctable film ribbon.
• C o v e r - u p Correction Tape
This tape is used together with fabric ribbon.
"641
Advertisement
Chapters
