Advertisement
TEXT MEMORY
c.
How to Edit Text
TEXT
IN/OUT
Upon
completion
of
printing, an exit is auto-
matically made from the
Text Memory Mode.
•
Press the TEXT IN/OUT
Key to exit from the
Text
Memory
Mode
while printing has been
temporarily stopped.
TEXT
IN/OUT
1
Press the TEXT IN/OUT
Key, enter the file name
corresponding to the file
whose contents are to be
edited and press the RE-
TURN Key.
2,
Proceed with the editing.
The cursor moves one character at
a time to the right. When it reaches
the end of the line it moves auto-
matically to the beginning of the
next line.
B A C K
SPACE
Stop Codes
The RK-T55 will allow you to enter and instruct it to
stop printing at a particular point so that you may
insert variables within the body of the text.
During text entry, input the
Stop Code by pressing the P
Key while pressing the CODE
Key.
As a result, when the text is
printed out, printing will stop
at that point.
The following message ap-
pears on the LCD Display.
CODE
+
FWD
1
CODE
+
B A C K
SPACE
1
RELOC
EXPRESS
R E L O C
EXPRESS
<3
The cursor moves one character at
a time to the left. When it reaches
the beginning of the line it moves
automatically to the end of the
previous line.
The cursor moves to the beginning
of the next line.
The cursor moves to the beginning
of the previous line.
The cursor moves to the beginning
of the text.
The cursor moves to the end of the
text.
The character above the cursor is
deleted.
0 STOP CODE
Type the variable information.
Character
keys
When a character key is pressed,
the character is inserted automati-
cally to the left of the cursor.
PRINT
ON/OFF
To resume printing, press the
PRINT ON/OFF Key.
The
variable information will not
become part of the stored text.
TEXT
IN/OUT
3
Upon completion of the
editing, press the TEXT
IN/OUT Key to exit from
the Text Memory Mode.
•Symbols
on the LCD
Display
0
Stop Code
TEXT MEMORY MODE END
Advertisement
Chapters
