Advertisement
Available languages
Available languages
© RF OUT CHANNEL trimmer
Selects the TV channel for the signal output from the RF OUT connector. The trimmer
is factory-set at channel 36.
@ MONITOR connector (8-pin)
Supplies the video and audio signals. Connect to a video monitor with a connecting
cable (optional). The audio signals are to be selected with the AUDIO switches on the
control panel. Time code or other data can be superimposed on the video signal
output from this connector by pressing the SUPERIMPOSE button on the control pane!
or remote control unit.
@ aAuDIO OUTPUT connectors
CH-1/3 and CH-2/4 connectors (phono jacks)
Output the audio signals selected with the AUDIO OUTPUT switch on the control
panel.
kee ee faa eh Output frem oa
-| CH-13 connector
————«| CH-2/4 connector
7) 7H ground terminal
If hum is heard in the audio signal, connect this terminal to the ground terminal of the
connected audio equipment.
@ ac INLET
Connect to an AC outlet (220 to 240 V) with the supplied AC power cord.
- 9(E)
Advertisement
