Sony BETACAM SP BVW-22P Operation Manual page 11

EP
Connector Panel
VIDEO OUTPUT connectors
2} RF OUT system selector
<) RF OUT CHANNEL trimmer
Gy RF OUT connector
ky MONITOR connector 2 + Ground terminal
iy AUDIO OUTPUT sy AC INLET
1) VIDEO OUTPUT connectors (BNC and phono jack)
Both BNC connector and phono jacks supply composite video signal. Connect to the
video input connector of a VTR or a video monitor. Time code or other data can be
superimposed on the signal output from these connectors by pressing the
SUPERIMPOSE button on the contro! panel or remote control unit.
2) RF OUT system selector
Selects the TV system (G or |) for the signal output from the RF OUT connector. The
selector is factory-set at G.
8(E)