Set Time Functions For Both Ovens Simultaneously - Gaggenau BX 480 Series Use And Care Manual

Delay end of cooking time
You have set the heat mode, temperature, and cooking
time.
M
1 Touch the symbol.
C
2 Using the , select
3 Using the rotary selector, set the preferred end of
cooking time.
I
4 Start with .
The appliance will go on standby. The screen will
display the mode, temperature, cooking time, and end of
cooking time. The appliance will start at the calculated
time and will turn off automatically once the cooking
time has run out.
6
Note: If the symbol is blinking: a cooking time has
not been set. Always set the cooking time first.
The appliance will turn off after the cooking time has
5
ended. The symbol will pulse and a signal will sound.
It will stop when you touch the
appliance door, or set the program selection to
Change end of cooking time:
Call up timer menu. Using the
cooking time". Using the rotary selector, set the
preferred end of cooking time. Start with
Cancel complete process:
Set program selection to
20
5
"end of cooking time".
™
symbol, open the
0
C 5
, select "end of
I
.
0 .
Set time functions for both ovens
simultaneously
Short-term timer and stopwatch are not available when
both ovens are in use.
Cooking time and end of cooking time can be set
simultaneously for both ovens.
Set a heat mode and temperature for both ovens. Select
the preferred oven using
time.
If the cooking time was only set for one oven, the
settings will be displayed on the left side of the screen.
Q R
The or
the upper or lower oven.
Example: it is 12:00. A 45-minute cooking time is set for
the lower oven. The cooking time will end at 12:45.
P
The symbol will bring up an overview. This is where
you can select the upper or lower oven.
If a cooking time was set for both ovens, the overview
will display the lower oven settings on the left and the
upper oven settings on the right side of the screen:
.
Q R
or and set the cooking
symbols display whether the settings are for