Core Temperature Probe; Insert The Core Temperature Probe In The Food To Be Cooked - Gaggenau BX 480 Series Use And Care Manual

The suggested value of 24h at 185° F (85°C)
appears in the display.
To set Stage 2 cooking time with rotary selector:
$
1 Touch the symbol to adjust the duration of Stage
6
2 cooking time .
2 Set the desired Stage 2 cooking time with the
rotary selector.
C
3 Touch the symbol to adjust the end of Stage 2
5
cooking time .
4 Select the end time with the rotary selector.
5 Change the date if needed by touching the
V
symbol to .
6 Rotate the selector to the desired date.
7 Confirm settings by touching the
To set Stage 2 temperature:
1 Rotate selector to desired Stage 2 temperature.
I
2 Start with .
The temperatures of Stage 1 and Stage 2 appear in the
display. The remaining time to the beginning of Stage 2
is counted down in the display. The Yom Tov screen will
appear as shown.
The program will begin with the pre-set warm
temperature without light, then advance to the
programmed temperature with light until the end of the
set date and time, and then maintain the pre-set warm
temperature for 60 minutes.
The appliance no longer heats after expiry of the time.
The display is blank. Set the program selector to
Switching off:
To cancel the operation, set the program selector to
22

Core temperature probe

The core temperature probe allows you to cook exactly
to the precise level you require. It measures the
temperature at the inside of the food. The automatic
switch-off when the desired core temperature is
reached ensures that all food is cooked precisely.
Note: The core temperature probe can only be used in
the lower oven.
Only use the core temperature probe supplied with the
cooker. You can purchase it as a spare part from the
after-sales service or in the online shop.
The core temperature probe may be damaged at
temperatures above 480°F (250°C). Therefore, only use
it in your appliance with a maximum temperature setting
of 445°F (230°C).
After use, always remove the core temperature probe
from the cooking compartment. Never store it inside the
cooking compartment.
C
After each use, clean the core temperature probe with a
damp cloth. Do not clean it in the dishwasher.
9
™
symbol.
9
Insert the core temperature probe in
the food to be cooked
Insert the core temperature probe in the food to be
cooked before you place it in the oven interior.
Insert the metal tip at the thickest point in the food you
are cooking. Make sure that the end of the tip is
approximately in the center. It must not be placed in the
fat and must not touch any cookware or bones.
If there are several pieces, insert the core temperature
probe in the middle of the thickest piece.
.
0
Insert the core temperature probe completely, if
possible.
0 .
WARNING
Risk of electric shock
Use of a wrong core temperature probe can
damage the insulation. Use only the core
temperature probe intended for this appliance.
WARNING
Risk of burns
The oven interior and the core temperature probe
become very hot. Use oven mitts to plug and
unplug the core temperature probe.