Setting The Core Temperature - Gaggenau BX 480 Series Use And Care Manual

In the case of poultry, make sure that the tip of the core
temperature probe is not in the cavity in the center, but
in the meat between the belly and upper leg.
When using with bread, insert the core temperature
probe into the coldest part of the bread only after
baking for 10–15 minutes. The core temperature probe
pierces the crust, but does not sink into the dough.
Continue baking the bread until the desired core
temperature is reached.

Setting the core temperature

1 Insert the food to cook in the cooking compartment
with a core temperature probe inserted. Insert the
core temperature probe into the socket in the top
right of the cooking compartment and close the
appliance door.
Be careful not to trap the cable of the core
temperature probe.
+
On the display, will appear and the current core
temperature.
2 Turn the function selector to the desired heating
type.
3 Use the rotary selector to set the cooking
compartment temperature.
+
4 Touch the symbol. Use the rotary selector to
change the set core temperature for the food and
+
confirm with .
The core temperature set must be higher than the
current core temperature.
5 The appliance heats with the set heating type.
The display indicates the current temperature, and
below that the set core temperature.
You can change the set core temperature at any
time.
Once the set core temperature is reached, a signal
sounds. Cooking is automatically ended. Confirm with
™
and set the function selector to
Notes
‒ The measurable range is 59 to 210° F (15 to 99°C).
Outside the measurable range, "--°F" is displayed
for the current core temperature.
‒ If you leave the food in the cooking compartment for
some time after cooking, the core temperature will
continue to rise somewhat due to the residual heat
in the cooking compartment.
‒ If at the same time you adjust a programming with
the core temperature probe and the cooking time
timer, then the programming switches the device off
that reaches the specified value first.
Changing the core temperature set :
+
Touch the symbol. Use the rotary selector to change
the set core temperature for the food and confirm with
+
.
Deleting the core temperature set :
+
Touch the symbol. Delete the set core temperature
Ž
with . The appliance continues heating in normal
cooking mode.
.
0
23