Operating The Appliance; Oven Interior; Inserting Accessories; Setting The Heating Mode And The Temperature - Gaggenau BX 480 Series Use And Care Manual

Operating the appliance

Oven interior

The cooking compartment has five shelf levels.
9
CAUTION
Do not place anything on the cooking
compartment floor. Do not cover it with aluminium
foil. A build-up of heat could damage the
appliance or cause injury.
9
CAUTION
Do not slide any accessories between the shelf
positions, or they may tip.

Inserting accessories

The accessories feature a latching function. The
latching function prevents tilting of accessories when
pulling them out. You must insert accessories in the
oven interior correctly so that tilt protection will work.
When inserting the rack, make sure
▯
that the engaging lug (a) points downward
▯
that the rack's safety clip is at the rear and top.
16
Setting the heating mode and the
temperature
You can operate both ovens simultaneously with
different settings.
Exception: during self-cleaning in one oven, you cannot
operate the second oven.
1 Use the function selector to set the type of heating.
Left function selector: lower oven
Right function selector: upper oven
The selected heating type and suggested
temperature appear on the display.
Example: lower oven, convection, 340° F (170°C).
2 Turn the rotary selector to set the desired
temperature.
"
The pre-heat symbol
bar shows the current pre-heat status. When the set
temperature is reached, a signal sounds, the pre-heat
"
symbol goes out.
Note: With a temperature setting below 160° F (70°C),
the cooking compartment lighting remains switched off.
If both ovens are switched on, the settings for both
ovens appear on the display. Select the display of the
Q
appropriate oven with
display of both ovens.
Switching off:
Set the function selector to
appears on the display. The
R P
or ; use to return to the
.
0