Table of Contents
Advertisement
12. OPERATION
12.1.4 OPERATIONS
AND CHECKS BEFORE STARTING ENGINE
a
WARNING
If the control levers are touched by accident, the work equipment or
the machine
may move suddenly.
When
leaving
the operator's
compartment,
always set the safety
lever securely
to the LOCK
position.
1
Check that the brake pedal is applied with the lock.
Check that the safety lock lever is engaged (down position).
Check that the mounted equipment is lowered on the ground or properly
blocked and the blade control lever is in the hold position.
4. Turn the master disconnect switch to the on position (clockwise).
2-28
Advertisement
Table of Contents
