Table of Contents
Advertisement
24. SERVICE PROCEDURE
24.1053
UNDERFLOOR
LINKAGE
Apply grease until clean lubricant is visible. Always use a clean lubricator and
wipe dirt from fittings before fresh grease is applied. If grease fails to go through
the fitting, determine the cause and correct it. After greasing, wipe off any old
grease that was purged.
24.10.6
SEAT
BELT
I
A
WARN'NG
-
Seat belt - do not clean
with
solvents
or bleach or redye color of
webbing as this may cause a severe loss of strength. This could cause
the webbing to break and result in personal injury. Wash in warm water
with a mild detergent.
Keep the belt flat to avoid twisting and roping when not being used. Do not place
heavy or sharp objects on the belt.
The entire seat belt assembly should be inspected periodically
for corrosion,
wear, fraying or wear spots. The seat belt mounting
bolts should also be
periodically
inspected for tightness.
3-55
Advertisement
Table of Contents
