Table of Contents
Advertisement
12. OPERATION
12.1 .I .I
CHECK FOR DAMAGE, WEAR, AND/OR PLAY IN WORK EQUIP-
MENT, CYLINDERS,
LINKAGE, HOSES.
Check that there are no cracks, excessive wear, or play in the work equip-
ment, cylinders, linkage, or hoses. If any abnormality
is found, repair it.
12.1 .I.2
REMOVE DIRT FROM AROUND ENGINE, RADIATOR.
Check that there is no dirt accumulated
around the engine or radiator. If any
dirt is found, remove it.
12.1.1.3
CHECK FOR LEAKAGE OF WATER OR OIL AROUND ENGINE.
Check that there is no leakage of oil from the engine or leakage of water from
the cooling system. If any abnormality is found, repair it.
12.1.1.4
CHECK
FOR OIL LEAKAGE
FROM
TORQUE
CONVERTER,
TRANSMISSION,
REAR MAIN FRAME HOUSING, FINAL DRIVES,
HYDRAULIC
TANK, HOSES, JOINTS.
Check that there is no oil leakage. If any abnormality is found, repair the place
where the oil is leaking.
12.1 .I.5
CHECK THE UNDERCARRIAGE
(TRACK, SPROCKET,
IDLER,
GUARD) FOR DAMAGE, WEAR, LOOSE BOLTS, OR LEAKAGE
OF OIL FROM ROLLERS.
12.1 .I .6 CHECK FOR DAMAGE TO HANDRAIL.
Repair any damage and tighten any loose connections.
12.1.1.7
CHECK FOR DAMAGE TO GAUGES, LAMPS ON INSTRUMENT
PANEL.
Check that there is no damage to the panel, gauges and lamps. If any
abnormality is found, replace the parts. Clean off any dirt on the surface.
12.1.1.8 CHECK FOR DAMAGE TO SEAT BELT AND MOUNTING AREAS.
Check that there is no abnormality in the seat belt or mounting areas. If there
is any damage, replace with new parts.
2-20
Advertisement
Table of Contents
