Air Grommet
This section will instruct the correct procedure on how to remove and replace the Air
Grommet.
Removal
Step 1 - Remove external covers off the Hoist. (refer to section 9.1)
Step 2 – Remove the Battery from the battery brackets. (refer to section (9.3)
Step 3 – Remove QRS Hook. (Refer to section 9.6)
Step 4 – Remove Bottom cover from Hoist. (Refer to section 9.7)
Step 5 - Remove the two Coloured Air Tubes from the Air Switches on the PCB.
Step 6 – Pull all four Air Tubes through the Black grommet in the Chassis Wall.
Step 7 – Simply slide the Air Grommet from its positioning and remove.
Refitting / Replacement
Page 55 of 63