Bottom Cover - Mackworth TX440 Advanced PT Service Manual

Ceiling track hoist

Hide thumbs Also See for TX440 Advanced PT:

Table of Contents

B) Ensure the hook is attached to the lift tape in the below orientation.

Bottom Cover

This section will instruct the correct procedure on how to remove and replace the Bottom

Cover.

Removal

Step 1 - Remove external covers of the Hoist. (refer to section 9.1)

Step 2 – Remove QRS Hook. (refer to section 9.6)

Step 3 – Disconnect the power cable from the PCB.

Step 4 – Disconnect the display and LED able from the PCB. (Arrowed)

Page 34 of 63

Table of Contents

Tx440 advanced qrtTx440 advanced rtcTx440 advanced mtccTx440 advanced ptccTx440 advanced mtpaTx440 advanced ptpa ... Show all