Elation CHORUS LINE 8 User Manual page 12

I N S TA L L AT I O N I N S T R U C T I O N S
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating
working load limits, understanding the installation material being used, and periodic safety
inspection of all installation material and the fixture itself. If you lack these qualifications,
do not attempt to perform the installation yourself. Improper installation can result in bodily
injury.
The fixture can be mounted hanging upside down from a truss, suspended sideways from a
truss, or standing upright on a flat, stable surface, as shown in the image above.
POWER LINKING
USE CAUTION WHEN POWER LINKING FIXTURES OF OTHER MAKE AND MODEL TYPES, AS
THE POWER CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX POWER
OUTPUT ON THIS FIXTURE. CHECK SILK SCREEN FOR AMX AMPS.
KLING-NET / ART-NET CONNECTION
When connecting fixture to a network switch to control multiple devices, a Gigabit Ethernet
Switch that supports IGMP (Internet Group Management Protocol) is required. Using a
Gigabit Ethernet Switch that does not support IGMP can cause erratic behavior of all con-
nected devices to the switch. Click link below for more information about IGMP.
https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol
12