Table of Contents
Advertisement
H5CZ
Dimensions
Digital Timers
Digital Timers
H5CZ-L8@ (Flush Mounting/Surface Mounting Models)
Dimensions with Flush Mounting Adapter
H5CZ-L8@ (Adapter and Waterproof Packing Ordered Separately)
58
Dimensions with Front Connecting Socket
H5CZ
*
-L8@
92.3
P2CF-08(-E) (order separately)
Front Connecting Socket
8
48×48
6
63.7
Y92S-29 (order separately)
Panel
Y92F-30 (order separately)
Waterproof Packing
Flush Mounting Adapter
(51)
48
7.5
90
* These dimensions vary with the type of DIN track (reference value).
14.2
44.8×44.8
P3G-08 (order
separately)
Back-connecting
Socket
84.8
(unit: mm)
Panel Cutouts
Panel cutouts areas shown below. (according
to DIN43700).
60 min.
+0.6
45
0
+0.6
45
0
15 min.
60 min.
Note: 1. The mounting panel thickness
should be 1 to 5 mm.
2. To allow easier operation, it is
recommended that Adapters be
mounted so that the gap between
sides with hooks is at least 15 mm
(i.e., with the panel cutouts
separated by at least 60 mm).
3. It is possible to mount Timers side
by side, but only in the direction
without the hooks. (However, if
Timers are mounted side by side,
water resistance will be lost.)
n Units mounted side-by-side
A
+1
A=(48n-2.5)
–0
With Y92A-48F1 attached.
A={48n-2.5+(n-1)×4}
+1
–0
With Y92A-48 attached.
+1
A = (51n - 5.5)
–0
Advertisement
Table of Contents
