Omron H5CZ Manual page 21

Mode E: Interval (Timer resets when power comes ON.)
Basic operation
Power
Timing
Time-limit
output
Instantaneous
output
The Timer starts when the power comes ON or when
the reset input goes OFF.
Note: Output is not instantaneous when setting is 0.
Mode Z: ON/OFF-duty adjustable flicker (Timer resets when power comes ON.)
Basic operation
Power
Timing (cycle time) Timing (cycle time)
Time-limit
Timing Timing
output
(ON duty) (ON duty)
Instantaneous
output
The Timer starts when the power comes ON or when
the reset input goes OFF.
Note: Normal output operation will not be possible if
the set time is too short.
Set the value to at least 100 ms.
Note: H5CZ-L8E@ Precautions
Set the Timer's set value before using the Timer in a self-holding circuit.
Detailed operation
t-a t
Power
Reset Key
Time-limit
contacts, NC
Time-limit
contacts, NO
Instantaneous
contacts, NC
Instantaneous
contacts, NO
t = Set time, Rt = Reset time (0.5 s min.), t – a < t (Indicates the time is less than the set time.)
Detailed operation
t
t-a
dty
Power
Reset Key
Time-limit
contacts, NC
Time-limit
contacts, NO
Instantaneous
contacts, NC
Instantaneous
contacts, NO
t = Set time, dty = ON duty time, Rt = Reset time (0.5 s min.), t – a < t (Indicates the time is less than the set time.)
Rt t t-a
t-a t t-a
Rt t-a
dty dty dty
H5CZ
Timer
Rt t-a
Rt t-a
21